Newcon Optik NC 3-12X50 Manuel d'utilisateur télécharger pdf (Page 24)

9. ADJUSTMENT ON THE WEAPON

The riflescope is equipped with tactical multi-

revolving reticle adjustment mechanism. Screws of

the adjustment mechanism are terminated with

knobs (5, Fig.1) with the horizontal and vertical

scales, which allow precise determining of the clicks

and turns of the knob(s).

Adjustment is performed as follows:

1) Mount the riflescope to the weapon;

2) Find a target or choose a point of aim;

3) Lock the weapon on the shooting stand;

4) Aim the weapon at the target using iron

sights installed on the weapon (if it is possible).

At this stage you can use laser boresighting

riflescope (LBS, to be purchased separately),

which is inserted into the barrel of the weapon

and points to the geometrical point of the barrel

extension:

5) By rotating the windage/elevation

adjustment knobs, achieve overlapping of the

cross hair with the aiming point indicated by

the iron sight or LBS;

6) Take the weapon from the stand and remove

LBS;

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Newcon Optik NC 3-12X50 Manuel d'utilisateur Page 24